Turbofan P8M Prover/Holding Cabinet

The Turbofan P8M Prover/Holding Cabinet is a versatile and efficient solution for your bakery needs. Its dual-functionality as a prover and holding cabinet makes it perfect for individual use or system installation with Turbofan 32D Convection Ovens. With an 8 full-size sheet pan capacity and 16 half-size sheet pan capacity, this compact cabinet is ideal for small to medium-sized kitchens. The low-velocity circulation fan system, mechanical thermostat, and humidity level control ensure consistent and precise temperature and humidity control.

The cabinet is easy to clean with fully removable stainless steel rack support and a removable humidity water tank. It also features a 304 stainless steel interior cabinet, stainless steel front, sides, and top exterior, and a side-hinged door with 5mm thick door glass. The cabinet comes with 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, and 2 rigid rear castors for easy maneuverability. With its impressive features, the Turbofan P8M Prover/Holding Cabinet is a must-have for any bakery looking to improve its efficiency and productivity.

Features

• Dual-function Prover and Holding Cabinet
• Designed for individual use or system installed with Turbofan 32D Convection Ovens
• 8 460mm x 660mm / 18" x 26" full size sheet pan capacity
• 16 460mm x 330mm / 18" x 13" half size sheet pan capacity
• 8 400mm x 600mm tray capacity (optional kit)
• 76mm tray spacing
• Compact 735mm width
• 10A plug-in cord set fitted
• Full double-skin construction
• Auto water fill system with optional integrated water filter kit
• Continuous door seal
• Side-hinged door (standard LH hinge). Optional RH hinge (field convertible)
• Off / Prove / Hold mode selection
• Low-velocity circulation fan system
• Mechanical thermostat
• Humidity level control
• Dual halogen cabinet interior lamps
• Cabinet temperature display thermometer
• 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
• 100% recyclable packaging

Construction

• 304 stainless steel interior cabinet
• Stainless steel front, sides and top exterior
• Stainless steel interior side racks
• Stainless steel frame side hinged door
• 5mm thick door glass
• Stainless steel control panel
• Aluminised coated steel base and rear panels
•  

Controls

• Off / Prove / Holding mode selector switch.
• Mechanical thermostat 20-85°C
• Air heating ON control panel indicator
• Humidity level control
• Humidity tank ON control panel indicator
• Cabiet temperature thermometer
• Auto-fill water system standard
•  

Cleaning

• Stainless steel top and side exterior panels
• Stainless steel interior chamber
• Easy access to all interior surfaces
• Fully removable stainless steel rack support
• Removable humidity water tank (no tools)

Specifications

• Electrical Requirements
  • 230-240V, 50Hz, 1P+N+E, 1.5kW, 6.3A
  • 10A cord set fitted
• Water Requirements (optional)
  • Cold water connection ¾" BSP male
  • 80psi maximum inlet pressure / 20psi minimum inlet pressure
• External Dimensions
  • Width 735mm
  • Height 914mm including dia. 76mm castors
  • Depth 810mm
• Internal Dimensions
  • Width 465mm
  • Height 730mm
  • Depth 700mm
  • Volume 0.24m3
• Nett Weight: 77.5kg
• Installation Clearances
  
  • Rear 0mm
  • LH Side 0mm
  • RH Side 25mm
• Clearance from sources of heat
  • A minimum distance of 300mm from the appliance sides is required