Turbofan P10M Manual Electric Prover And Holding Cabinet
Product Description
This Turbofan P10M Manual Electric Prover And Holding Cabinet is the perfect addition to your commercial kitchen! This dual-function cabinet can be used as a prover or holding cabinet and is designed for individual use or system installation with the Turbofan E33D Convection Oven. With a 10 x 1/1 GN Gastronorm pan capacity and 74mm tray spacing, this cabinet is compact with a width of only 610mm.
The P10M is designed with your convenience in mind, featuring a 10A plug-in cord set and full double-skin construction. An auto-fill water system with an optional integrated water filter kit ensures that the cabinet is always filled with the necessary water for your cooking needs. The low-velocity circulation fan system and mechanical thermostat with a range of 20-85°C allow you to easily control the temperature and humidity levels.
The P10M is also built for durability, with a 304 stainless steel interior cabinet, stainless steel front, sides and top exterior, and stainless steel interior side racks. The cabinet features a dual halogen interior lighting system, a cabinet temperature display thermometer, and a continuous door seal to keep your food fresh and warm.
With its compact design and easy-to-use features, the Turbofan P10M Manual Electric Prover And Holding Cabinet are a must-have for any commercial kitchen.
Features
- Dual-function Prover and Holding Cabinet
- Designed for individual use or system installed with Turbofan E33D Convection Oven
- 10 x 1/1 GN Gastronorm pan capacity
- 74mm tray spacing
- Compact 610mm width
- 10A plug-in cord set fitted
- Full double-skin construction
- Air heating ON control panel indicator
- Auto water fill system with optional integrated water filter kit
- Continuous door seal
- Auto-fill water system standard
- Off / Prove / Hold mode selection dial
- Low-velocity circulation fan system
- Mechanical thermostat 20-85C
- Humidity level control
- Humidity tank ON control panel indicator
- Dual halogen cabinet interior lamps
- Cabinet temperature display thermometer
- Single phase connection
- 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
- 100% recyclable packaging
Construction
- 304 stainless steel interior cabinet
- Stainless steel front, sides and top exterior
- Stainless steel interior side racks
- Stainless steel frame side hinged door
- 5mm thick door glass
- Stainless steel control panel
- Aluminised coated steel base and rear panels
Controls
- Off / Prove / Holding mode selector switch.
- Mechanical thermostat 20-85°C
- Air heating ON control panel indicator
- Humidity tank ON control panel indicator
- Cabinet temperature thermometer
- Auto-fill water system standard
Cleaning
- Stainless steel top and side exterior panels
- Stainless steel interior chamber
- Easy access to all interior surfaces
- Fully removable stainless steel rack support
- Removable humidity water tank (no tools)
Specifications
- Electrical Requirements
- 230-240V, 50Hz, 1P+N+E, 1.9kW, 8.0A
- 10A cord set fitted
- Water Requirements (optional)
- Cold water connection ¾" BSP male
- 80psi maximum inlet pressure / 20psi minimum inlet pressure
- External Dimensions
- Width 610mm
- Height 1015mm including dia. 76mm castors
- Depth 680mm
- Nett Weight: 77.5kg
- Installation Clearances
- Rear 25mm
- LH Side 0mm
- RH Side 0mm
- Clearance from sources of heat
- A minimum distance of 300mm from the appliance sides is required