Provers

Provers

These proving cabinets regulate temperature and humidity to ensure that your dough rises in ideal conditions, perfect for your bakery needs. We have a range of Turbofan Provers and holding cabinets.

We recommend that customers who wish to purchase items such as these proving cabinets consult with one of our friendly sales reps, to iron out all the fine detail that can accompany such purchases and ensure that you receive the correct model and specifications for your particular needs. Southern Hospitality Ltd stock a wide variety of commercial kitchen equipment and if you cannot find what you are looking for, give us a call at 0800 503 335 or email us at WebOrders@SouthernHospitality.co.nz.

Grid  List 

5 Items

per page
  1. Turbofan P8M Prover/Holding Cabinet

    was $6,062.00

    $4,546.50 plus GST

    The best performing ideas in the Turbofan range have been re-designed, re-developed and re-born as a durable series of convection ovens designed for ease of use, increased application and future-proof durability. Each product in the series carries Turbofan performance and durability in its DNA. The superior looks are also fully supported by an array of incredible features, and the range is further complemented by P Series prover / holding cabinets and oven support stands.

    Our upgraded range of prover/holding cabinets are smart in design and even smarter in engineering. You can use them individually or as part of a system with a compatible Turbofan oven.

    Southern Hospitality Ltd recommends that customers who wish to purchase items such as this consult with one of our friendly sales reps, to iron out all of the fine detail that can accompany such purchases, and ensure that you receive the correct model and specifications for your particular needs.

    If you would like to view this prover, please contact us at 0800 503 335 or weborders@southernhospitality.co.nz.

    Turbofan P8M - Full Size Tray Manual Electric Prover And Holding Cabinet - Product Features

    • Dual function Prover and Holding Cabinet
    • Designed for individual use or system installed with Turbofan 32D Convection Ovens
    • 8 460mm x 660mm / 18" x 26" full size sheet pan capacity
    • 16 460mm x 330mm / 18" x 13" half size sheet pan capacity
    • 8 400mm x 600mm tray capacity (optional kit)
    • 76mm tray spacing
    • Compact 735mm width
    • 10A plug-in cordset fitted
    • Full double skin construction
    • Auto water fill system with optional integrated water filter kit
    • Continuous door seal
    • Side hinged door (standard LH hinge). Optional RH hinge (field convertible)
    • Off / Prove / Hold mode selection
    • Low velocity circulation fan system
    • Mechanical thermostat
    • Humidity level control
    • Dual halogen cabinet interior lamps
    • Cabinet temperature display thermometer
    • 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
    • 100% recyclable packaging
    • Construction
      • 304 stainless steel interior cabinet
      • Stainless steel front, sides and top exterior
      • Stainless steel interior side racks
      • Stainless steel frame side hinged door
      • 5mm thick door glass
      • Stainless steel control panel
      • Aluminised coated steel base and rear panels
    • Controls
      • Off / Prove / Holding mode selector switch.
      • Mechanical thermostat 20-85°C
      • Air heating ON control panel indicator
      • Humidity level control
      • Humidity tank ON control panel indicator
      • Cabinet temperature thermometer
      • Auto-fill water system standard
    • Cleaning
      • Stainless steel top and side exterior panels
      • Stainless steel interior chamber
      • Easy access to all interior surfaces
      • Fully removable stainless steel rack support
      • Removable humidity water tank (no tools)

    Specifications

    • Electrical Requirements
      • 230-240V, 50Hz, 1P+N+E, 1.5kW, 6.3A
      • 10A cordset fitted
    • Water Requirements (optional)
      • Cold water connection ¾" BSP male
      • 80psi maximum inlet pressure / 20psi minimum inlet pressure
    • External Dimensions
      • Width 735mm
      • Height 914mm including dia. 76mm castors
      • Depth 810mm
    • Internal Dimensions
      • Width 465mm
      • Height 730mm
      • Depth 700mm
      • Volume 0.24m3
    • Nett Weight: 77.5kg
    • Installation Clearances
      • Rear 0mm
      • LH Side 0mm
      • RH Side 25mm
    • Clearance from sources of heat
      • A minimum distance of 300mm from the appliance sides is required
    Read More
  2. Turbofan P85M12 Prover/holding Cabinet - size 12

    was $6,314.00

    $4,735.50 plus GST

    For the best of baking power and practicality, Turbofan’s range of proofer / prover holding cabinets are smart in design and even smarter in engineering. Use them individually or as part of a system with compatible 30 Series ovens to build your own baking system. Increase productivity without increasing floor space, this prover sits neatly underneath the oven for an intelligent baking centre system. Refined to fit the new Turbofan E35 convection oven, the P85M12 is the perfect choice in power and practicality.

    The P85M12 controls heat and humidity for accurate yeast activation and thermostat control for proving and hot holding mode. Manual controller interface offers simple and efficient access to high performance power with a mechanical thermostat for time and temperature setting.

    Southern Hospitality Ltd recommends that customers who wish to purchase items such as this consult with one of our friendly sales reps, to iron out all of the fine detail that can accompany such purchases, and ensure that you receive the correct model and specifications for your particular needs.

    If you would like to view this product, please contact us at 0800 503 335 or weborders@southernhospitality.co.nz.

    Turbofan P85M12 - Prover / Holding Cabinet - Full Size 12 Tray Electric / Manual - Features

    • 12 406mm x 736mm / 16” x 29” tray capacity
    • 74mm tray spacing
    • 910mm width
    • Designed for individual use or system installed with Turbofan E35D and E35T Convection Ovens
    • Dual function Prover and Holding Cabinet
    • Full double skin construction
    • Continuous door seal
    • Off / Proof / Hold mode selection
    • Low velocity circulation fan system
    • Mechanical thermostat
    • Humidity level control
    • Dual halogen cabinet interior lamps
    • Cabinet temperature display thermometer
    • Auto water fill system with optional integrated water filter kit
    • 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
    • 10A cordset fitted
    • Side hinged door (standard LH hinge). Optional RH hinge (field convertible)
    • 100% recyclable packaging
    • Construction
      • 304 stainless steel interior cabinet
      • Stainless steel front, sides and top exterior
      • Stainless steel interior side racks
      • Stainless steel frame side hinged door
      • 5mm thick door glass
      • Stainless steel control panel
      • Aluminised coated steel base and rear panels
    • Controls
      • Off / Proof / Holding mode selector switch.
      • Mechanical thermostat 20-85°C
      • Air heating ON control panel indicator
      • Humidity level control
      • Humidity tank ON control panel indicator
      • Cabinet temperature thermometer
      • Auto-fill water system standard
    • Cleaning
      • Stainless steel top and side exterior panels
      • Stainless steel interior chamber
      • Easy access to all interior surfaces
      • Fully removable stainless steel rack support
      • Removable humidity water tank (no tools)

    Specifications

    • Electrical Requirements
      • 230-240V, 50Hz, 1 phase, 1.5kW, 6.2A
      • 10A cordset fitted
    • Water Requirements (optional)
      • Cold water connection ¾” BSP male
      • 80psi maximum inlet pressure / 20psi minimum inlet pressure
    • External Dimensions
      • Width 910mm
      • Height 1129mm including dia. 76mm castors
      • Depth 810mm
    • Internal Dimensions
      • Width 465mm
      • Height 945mm
      • Depth 795mm
      • Volume 0.35m3
    • Nett Weight: 107kg
    • Installation Clearances
      • Rear 25mm
      • LH Side 25mm
      • RH Side 25mm
    • Clearance from source of heat
      • A minimum distance of 300mm from the appliance sides is required
    Read More
  3. Turbofan P85M8 Prover/holding Cabinet - size 8

    was $5,567.00

    $4,175.25 plus GST

    For the best of baking power and practicality, Turbofan’s range of proofer / prover holding cabinets are smart in design and even smarter in engineering. Use them individually or as part of a system with compatible 30 Series ovens to build your own baking system. Redesigned to complement the new Turbofan E35 ovens, the P85M8 is a full-size electric prover and holding cabinet to complete our high performance baking centre.

    Manual controller interface offers simple and efficient access to high performance power with a mechanical thermostat for time and temperature setting. Stylish and durable on the outside, it is full of innovation on the inside and delivers accurate proving of fresh and frozen dough. The prover controls heat and humidity for accurate yeast activation and thermostat control for proving and hot holding mode.

    Southern Hospitality Ltd recommends that customers who wish to purchase items such as this consult with one of our friendly sales reps, to iron out all of the fine detail that can accompany such purchases, and ensure that you receive the correct model and specifications for your particular needs.

    If you would like to view this product, please contact us at 0800 503 335 or weborders@southernhospitality.co.nz.

    Turbofan P85M8 - Prover / Holding Cabinet - Full Size 8 Tray Electric / Manual Double Stacked - Features

    • 8 406mm x 736mm / 18" x 30" tray capacity
    • Dual function Prover and Holding Cabinet
    • Low velocity circulation fan system
    • Mechanical thermostat
    • Humidity level control
    • Auto water fill system with optional integrated water filter kit
    • Designed for individual use or system installed with Turbofan E35D and E35T Convection Ovens
    • Full double skin construction
    • Continuous door seal
    • Side hinged door (standard LH hinge). Optional RH hinge (field convertible)
    • Off / Proof / Hold mode selection
    • Dual halogen cabinet interior lamps
    • Cabinet temperature display thermometer
    • 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
    • 76mm tray spacing
    • 910mm width
    • 10A cordset fitted
    • 100% recyclable packaging
    • Construction
      • 304 stainless steel interior cabinet
      • Stainless steel front, sides and top exterior
      • Stainless steel interior side racks
      • Stainless steel frame side hinged door
      • 5mm thick door glass
      • Stainless steel control panel
      • Aluminised coated steel base and rear panels
    • Controls
      • Off / Proof / Holding mode selector switch.
      • Mechanical thermostat 20-85°C
      • Air heating ON control panel indicator
      • Humidity level control
      • Humidity tank ON control panel indicator
      • Cabinet temperature thermometer
      • Auto-fill water system standard
    • Cleaning
      • Stainless steel top and side exterior panels
      • Stainless steel interior chamber
      • Easy access to all interior surfaces
      • Fully removable stainless steel rack support
      • Removable humidity water tank (no tools)

    Specifications

    • Electrical Requirements
      • 230-240V, 50Hz, 1 phase, 1.5kW, 6.2A
      • 10A cordset fitted
    • Water Requirements (optional)
      • Cold water connection ¾” BSP male
      • 80psi maximum inlet pressure / 20psi minimum inlet pressure
    • External Dimensions
      • Width 910mm
      • Height 914mm including dia. 76mm castors
      • Depth 880mm
    • Internal Dimensions
      • Width 465mm
      • Height 730mm
      • Depth 795mm
      • Volume 0.27m3
    • Nett Weight: 93kg
    • Installation Clearances
      • Rear 25mm
      • LH Side 25mm
      • RH Side 25mm
    • Clearance from source of heat
      • A minimum distance of 300mm from the appliance sides is required
    Read More
  4. Turbofan P12M Prover/Holding Cabinet

    was $6,649.00

    $4,986.75 plus GST

    The best performing ideas in the Turbofan range have been re-designed, re-developed and re-born as a durable series of convection ovens designed for ease of use, increased application and future-proof durability. Each product in the series carries Turbofan performance and durability in its DNA. The superior looks are also fully supported by an array of incredible features, and the range is further complemented by P Series prover / holding cabinets and oven support stands.

    Our upgraded range of prover/holding cabinets are smart in design and even smarter in engineering. You can use them individually or as part of a system with a compatible Turbofan oven.

    Southern Hospitality Ltd recommends that customers who wish to purchase items such as this consult with one of our friendly sales reps, to iron out all of the fine detail that can accompany such purchases, and ensure that you receive the correct model and specifications for your particular needs.

    If you would like to view this prover, please contact us at 0800 503 335 or weborders@southernhospitality.co.nz.

    E33D5-Digital

    Turbofan P12M - Full Size Tray Manual Electric Prover And Holding Cabinet - Product Features

    • Dual function Prover and Holding Cabinet
    • Designed for individual use or system installed with Turbofan 32D Convection Ovens
    • 12 460mm x 660mm / 18" x 26" full size sheet pan capacity
    • 24 460mm x 330mm / 18" x 13" half size sheet pan capacity
    • 12 400mm x 600mm tray capacity (optional kit)
    • 74mm tray spacing
    • Compact 735mm width
    • 10A plug-in cordset fitted
    • Full double skin construction
    • Auto water fill system with optional integrated water filter kit
    • Continuous door seal
    • Side hinged door (standard LH hinge). Optional RH hinge (field convertible)
    • Off / Prove / Hold mode selection
    • Low velocity circulation fan system
    • Mechanical thermostat
    • Humidity level control
    • Dual halogen cabinet interior lamps
    • Cabinet temperature display thermometer
    • 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
    • 100% recyclable packaging
    • Construction
      • 304 stainless steel interior cabinet
      • Stainless steel front, sides and top exterior
      • Stainless steel interior side racks
      • Stainless steel frame side hinged door
      • 5mm thick door glass
      • Stainless steel control panel
      • Aluminised coated steel base and rear panels
    • Controls
      • Off / Prove / Holding mode selector switch.
      • Mechanical thermostat 20-85°C
      • Air heating ON control panel indicator
      • Humidity level control
      • Humidity tank ON control panel indicator
      • Cabinet temperature thermometer
      • Auto-fill water system standard
    • Cleaning
      • Stainless steel top and side exterior panels
      • Stainless steel interior chamber
      • Easy access to all interior surfaces
      • Fully removable stainless steel rack support
      • Removable humidity water tank (no tools)

    Specifications

    • Electrical Requirements
      • 230-240V, 50Hz, 1P+N+E, 1.9kW, 8.0A
      • 10A cordset fitted
    • Water Requirements (optional)
      • Cold water connection ¾" BSP male
      • 80psi maximum inlet pressure / 20psi minimum inlet pressure
    • External Dimensions
      • Width 735mm
      • Height 1129mm including dia. 76mm castors
      • Depth 810mm
    • Internal Dimensions
      • Width 465mm
      • Height 945mm
      • Depth 700mm
      • Volume 0.31m3
    • Nett Weight: 88kg
    • Installation Clearances
      • Rear 0mm
      • LH Side 0mm
      • RH Side 25mm
    • Clearance from sources of heat
      • A minimum distance of 300mm from the appliance sides is required
    Read More
  5. Turbofan P10M Manual Electric Prover And Holding Cabinet

    was $6,273.00

    $4,516.56 plus GST

    The best performing ideas in the Turbofan range have been re-designed, re-developed and re-born as a durable series of convection ovens designed for ease of use, increased application and future-proof durability. Each product in the series carries Turbofan performance and durability in its DNA. The superior looks are also fully supported by an array of incredible features, and the range is further complemented by P Series prover / holding cabinets and oven support stands.

    Our upgraded range of prover/holding cabinets are smart in design and even smarter in engineering. You can use them individually or as part of a system with a compatible Turbofan oven.

    Southern Hospitality Ltd recommends that customers who wish to purchase items such as this consult with one of our friendly sales reps, to iron out all of the fine detail that can accompany such purchases, and ensure that you receive the correct model and specifications for your particular needs.

    If you would like to view this prover/holding cabinet, please contact us at 0800 503 335 or weborders@southernhospitality.co.nz.

    Turbofan P10M - Full Size Tray Manual Electric Prover And Holding Cabinet - Product Features

    • Dual function Prover and Holding Cabinet
    • Designed for individual use or system installed with Turbofan E33D Convection Oven
    • 10 x 1/1 GN Gastronorm pan capacity
    • 74mm tray spacing
    • Compact 610mm width
    • 10A plug-in cordset fitted
    • Full double skin construction
    • Air heating ON control panel indicator
    • Auto water fill system with optional integrated water filter kit
    • Continuous door seal
    • Auto-fill water system standard
    • Off / Prove / Hold mode selection dial
    • Low velocity circulation fan system
    • Mechanical thermostat 20-85C
    • Humidity level control
    • Humidity tank ON control panel indicator
    • Dual halogen cabinet interior lamps
    • Cabinet temperature display thermometer
    • Single phase connection
    • 4 dia. 76mm castors with 2 front castors dual wheel and swivel lock, 2 rigid rear castors
    • 100% recyclable packaging
    • Construction
      • 304 stainless steel interior cabinet
      • Stainless steel front, sides and top exterior
      • Stainless steel interior side racks
      • Stainless steel frame side hinged door
      • 5mm thick door glass
      • Stainless steel control panel
      • Aluminised coated steel base and rear panels
    • Controls
      • Off / Prove / Holding mode selector switch.
      • Mechanical thermostat 20-85°C
      • Air heating ON control panel indicator
      • Humidity level control
      • Humidity tank ON control panel indicator
      • Cabinet temperature thermometer
      • Auto-fill water system standard
    • Cleaning
      • Stainless steel top and side exterior panels
      • Stainless steel interior chamber
      • Easy access to all interior surfaces
      • Fully removable stainless steel rack support
      • Removable humidity water tank (no tools)

    Specifications

    • Electrical Requirements
      • 230-240V, 50Hz, 1P+N+E, 1.9kW, 8.0A
      • 10A cordset fitted
    • Water Requirements (optional)
      • Cold water connection ¾" BSP male
      • 80psi maximum inlet pressure / 20psi minimum inlet pressure
    • External Dimensions
      • Width 610mm
      • Height 1015mm including dia. 76mm castors
      • Depth 680mm
    • Nett Weight: 77.5kg
    • Installation Clearances
      • Rear 25mm
      • LH Side 0mm
      • RH Side 0mm
    • Clearance from sources of heat
      • A minimum distance of 300mm from the appliance sides is required
    Read More

Grid  List 

5 Items

per page